New Windows $$$$ vs. Window Film $

Home in Reunion neighborhood of Commerce City, with 3M Night Vision 25 applied to all of the homes windows. 99% UV rejection, Solar Heat Reduction of 29% solar heat reduction, and 72% glare reduction.

At a certain point in your homes lifespan you might need new windows. When or how that happens is a different story dependent on the quality of windows your home got in the first place, and regardless of that, the need for a complete window replacement is something that will take no less than 15 years to become an issue even worth looking into, and why is this, well for one it’s incredibly expensive! And the other reason is because you can have window film installed for a fraction of the cost.

I know this because I need new windows. I know….the horror! How could a window film dealer throw in the towel and buy new windows. Well here’s the story, our house is about 20 years old, and our windows are busted up! The glass itself performs well, because well, we have window film, but outside that our frames are a mess, and it’s hard to even open and shut or lock our windows.

When Heath (my husband) and I moved into our home about 8 years ago, the seals on the entire west side of our house were blown, the glass sliding doors were super scratched from the previous Owners dogs, and now we’re noticing Low-E failure on a few of the windows. We’ve been avoiding fixing the issue for years because of the cost, but after 8 years we’ve decided to finally throw in the towel and purchase new windows.

When our Salesman came to the appointment he broke out his BTU meter (a device that measures heat), and heat lamp to show us how well his glass performed over ours, but sadly to his dismay, our glass performed better because we had Night Vision 15 applied to it. He was not expecting this, and really didn’t know which direction to go with his sales pitch. I reminded him that our windows have film and perform incredibly well, but what we needed was a clean slate. I told him I also didn’t need to see a heat lamp, what I needed to see were numbers like the Solar Heat Gain Coefficient of the glass, the U-Value, Light Transparency, and UV reduction. Unfortunately he didn’t have this on him, but I was able to google it and pull that info. Apparently many people don’t ask for the specifications, all he has to do is a heat lamp presentation vs. their standard glass. His presentation is probably pretty impressive most of the time, because standard builder glass that many Home Owners have, does not perform well, and lets in tons of heat and all the UV.

So why am I telling this story while trying to sell film. Well, because not everyone has the busted up window issues that we are dealing with. If your window frames, and seals are in good shape, but your actual glass underperforms, you’d be spending way too much money to have new windows installed when you can simply upgrade them with a solar control window film. If a customer called with my exact house asking to have the west side filmed, our approximate estimate would be around $3500.00 vs. new windows which are $15,000.00!!! That’s a 1/4 of the cost. It’s a no brainer really.

Half of the west side of my house located in the Reunion neighborhood of Commerce City. Currently has 3M Night Vision 15 applied, which rejects 99% of the UV, reduces solar heat up to 43%, and an 81% glare reduction. I’ll update post when my new windows are installed.

If your windows are really old, or single paned, or have terrible frames, our films can’t fix that. But if you are only dealing with performance issues, window film will actually perform better than most high performing glass, at a much lower cost. I know when my new windows go in, they’ll still be getting some film. The new glass only blocks about 50%, of UV, and I want 99% UV reduction. I also want to further reduce the amount of solar heat coming into my home past the abilities of the new glass, and of course with west facing windows, I’ll need some glare control. In general most windows, even new high performing ones can further benefit from the application of a solar control film. Believe me, we’ve applied film to beautiful brand new glass for many Home Owners as well, where the glass alone just wasn’t cutting it, especially when it came to UV rejection, and fading of floors and furnishings.

If you are looking to upgrade your windows, call us at 303-862-6376 or email info@coloradosolarvision.com . - Shelley Meador

WINDOW FILM IN THE WINTER?

Definitely! The winter can be some of the most intense sunshine of the entire year. Especially for those south facing windows. Some homes with large picture windows can even become uncomfortably hot in the winter. Along with heat, the winter glare can be incredibly intense. Plus, UV rays don’t care about the temperature outside. They’ll cause just as bad, if not worse damage and fading to your homes furnishings and window coverings in the winter, as they do in the summer.

Depending on your situation you have many window film choices. If heat and glare are your main issue, then a traditional window film will work great. However if you’re also looking to retain the heat in your home while blocking the heat during those intense part of the days an insulating film might be what you need. An insulating window film like 3M Thinsulate will make your home more efficient 24 hours a day, 365 days a year.

Solar Control Window Film is a necessary upgrade for any home, any time of the year, and there is no better time than the winter time to make your home more comfortable year round.

3M Night Vision 25 applied to the windows at this home in Avon, CO. Great views of the slopes, less the glare, and UV Rays! A must

3M Prestige Window Film application in Vail, CO.

In House Graphics

Did you know that Solar Vision Inc. produces most of our graphics in house? Relocating to our new 6000 SQFT space in Henderson, CO has made it even easier for us to design, produce, and install your business' graphics. 

Send us your ideas, and artwork, and we'll produce a proof for your review. 

Our in-house graphics plotter can turn your concepts and designs into actual artwork for your office or store. 

Our Graphic Artist and Install team can produce what you need in house. Making the turn around on your graphics installation quick, and efficient.

One of many customer ideas designed, produced, and installed by Solar Vision Inc. 

3M Daylight Redirecting Film

Imagine using a free resource to light your home or building? Well now you can using 3M Daylight Redirecting Film! Clerestory glass and other high up windows can cause a lot of heat and glare, which results in a nuisance below.  You can reduce the glare by using a typical solar control film, however, if you want to make the most use of your free natural resource you can use 3M Daylight Redirecting Film instead.

3M Daylight Redirecting Film takes the sunlight and guides it to the center of the room, instead of straight down. 

Below is an example of 3M Daylight Redirecting Film at work from start to finish. The pictures were taken at a local Denver bank. The lobby has a beautiful tower with large windows to allow in natural light. Unfortunately that light was causing a lot of glare issues in the lobby for the customers and employees below. After completion the light is now where it should be....up above!! 

Visit our DRF page for more info on this awesome new product by 3M! http://www.coloradosolarvision.com/3m-daylight-redirect/

This is a great photo to highlight what was happening with the light before 3M Daylight Redirecting Film was applied. This was still early in the day, so you can imagine where the sun glare ended up in the afternoon. In the eyes of everyone below! 

These high windows required a scissor lift for the application of 3M Daylight Redirecting Film! This photo highlights the soothing frosted appearance of 3M Daylight Redirecting Film. 

Here's a partial application of 3M Daylight Redirecting Window Film. As you can see the windows on the right are receiving the most sun during this photo, and the light is directed up. 

Here's an unaltered photo of the completed look. The 3M Daylight Redirecting Film has stopped the glare and downward direction of the sun's rays. Now the light is directed to the center of this tower allowing a beautiful glow to illuminate the lobby area of this bank.

New Technology in Window Film

New technology in window film makes for a bright future in the business of window film.  Presently, energy saving films and decorative films are hot and that market is continuing to grow as well as new advancements in these films.  Four films have been developed and their use is becoming more present in buildings.  By 2020, it is predicted that these films will be used on a large scale.  (www.technicalwindowfilms.co.uk/window-tinting-news/future-window-films/) The four films are:

• Photochromic film which darkens when exposed to light like transition eyeglasses.
• Smart glass or electrochromatic changes from a clear glass to a frosted glass or a colored glass with an electrical current.  The current is controlled by a switch, a computer, or even a cell phone.  This can add privacy to an office, conference room, etc.  Another example is film applied in a lobby that is controlled by a computer to change to a darker film when the light is bright and then lighter or clear when it gets dark.
• Photovoltaic film converts daylight into electricity.
• Daylighting or Daylight redirecting film allows more light in at the top of the glass and directs it into the room reducing the need for electric lighting.  Presently, a metal shelf can be used for this, but the film is much more attractive and easy to clean.

Solar Vision, Inc is keeping well informed about these new technologies to bring its customers the best available product.

Trends in Commercial Architecture

Trends in commercial architecture include lots of glass. Glass walls are bigger than ever.  Glass walls create lots of opportunities to use natural light and open spaces.  Along with these glass walls, come new innovative uses in design using 3M Fasara frosted and decorative window films.  These films allow in light while adding just the amount of privacy wanted by the inhabitants.  The design elements are limited only by the imagination. (solutions.3m.com) Not only does the decorative films allow light and beauty in these spaces, they also add safety.  The film lets someone know the glass is there and will not be walked into.  In case a window is broken the fragments will hold together.

The glass with film is easy to care for.  It can be cleaned as any other glass after 30 days.  A plus is that finger prints do not readily show.

Frost Film Used for Privacy

Frost film used for privacy on these windows.  Sometimes blackout film is an option.  The frost film lets in natural light while the blackout film blocks all of the light.  These pictures show how the film looks from the inside and from the outside.  The client was very pleased  with the result.

Solar Control for Apartment Living

Solar Control for apartment living can be achieved through the use of a variety of solar control window films.  I have seen a number of apartments that get a lot of sun have all kinds of things in their windows to make it more comfortable.  I've seen cardboard, newspaper, sheets, and even a mattress.  Rental  property owners may ignore this or pose fines, but ultimately it affects the value of the property.  Solar control window films can greatly reduce the amount of sun and glare coming into a room.  Because it eliminates 99% of the UV rays, furnishings are not damaged.  It has the added protection of reducing the risk of skin cancer. Apartments usually are fitted with single layered glass.  Applying window film will give the window the effect of being double layered glass.  This would result in energy savings.  If a rental property company is energy conscious, it could advertise as making these changes to help save energy.  Solar control window film is especially valuable in those areas that get direct sunlight especially in the loft apartments on the top floors.

Window film is an relatively inexpensive way to make apartment living more comfortable.  Window film is easy to clean.  It is cleaned as any other window after 30 days.

Chalkboard Film

Chalkboard film can be used to make any flat surface into a chalkboard.  Film can also be used to make a flat surface into a whiteboard.  The film is less expensive than a traditional chalkboard. It is removable. It can be cleaned in the same way any chalkboard would be cleaned. This architectural film can make a fun space for children.

On shows like "Restaurant Impossible", the decorators are using the chalkboard look a lot to put menus or logos on the wall.

3M Prestige 60

3M Prestige 60 was applied to this home.  The film was applied to the bottom window and the top window had not been applied yet.  This is a picture that represents well how the view of a window is maintained.  3M Prestige 60 is the ultimate in window film technology.  It consists of over 200 layers and is as thin as paper.  The technology used is called nanotechnology.  The folds cannot even be seen using a microscope.  These folds bend and catch light to create a film that produces the effects out clients want. (solutions.3m.com) 3M Prestige 60:

• Reduces the amount of energy used to cool a home
• Eliminates over 99% of UV rays which damages furnishings and is a cause for skin cancer
• Is less reflective than class, so it enhances views
• Is nonmetallic and does not interfere with cell phone or wifi signals
• Increases personal safety by  holding together shards of glass in the event of something that would cause the glass to shatter

3M Prestige 60 is covered by the 3M Lifetime Warranty.

DICHROIC 3M Glass Finishes

Dichroic 3M glass finishes is a film that can be applied to glass or some plastics that show an array of color.  The color changes with the light that it is exposed to, the color of the surface it is applied to, and the angle it is viewed from.  This amazing film creates unique effects in whatever environment it is used in. (http://solutions.3m.com/wps/portal/3M/en_US/architectural-markets/home/glass-finishes/dichroic/) Dichroic 3M glass finishes are mostly used in commercial buildings, but can also be used in a home for a unique effect.  The look can be obtained by purchasing dichroic glass, but using film is a much more cost effective solution.  The application of it is also much  less expensive than installing the glass.

Dichroic film  'plays' with light, reflecting and bouncing it to reveal a natural color spectrum.

Dichroic film is:

• a visible color shift from both sides of the film-covered glass.
• applicable for glass and many plastics.
• available in warm and cool colors.
• made of premium grade multi-layer polyester.
• non-metallic, non-conductive and non-corrosive.

Colors:

• The Chill shift in cool tones-blue, magenta, yellow and  gold/blue color regions
• The Blaze are in warm tones

  

  

The film needs to be applied in an area where it will not receive abrasions.  A clear laminate protection is recommended.

Window Film Reduces Light Pollution

Window film can aid in reducing light pollution.  In creating buildings that are environmentally and socially responsible, designers seek LEED credits.  LEED is a building certification program developed by the US Green Building Council. Credits are given for new building construction and major renovations. There are 9 possible points a building project can achieve through the use of window film.  One credit can be earned in the area of light pollution reduction. Light pollution is misused light or misdirected light.

 The light pollution creates:

• Sky Glow which is a hazy glow over urban areas caused by light escaping into the night sky.
• Glare shining into the eyes of pedestrians or drivers.
• Light Trespass which is light shining into a neighboring buildings.
• Light clutter such as in the area of Las Vegas casinos.

Light pollution effects all of us by:

• Consuming valuable natural resources.  Hundreds of millions of coal and oil are used.
• Polluting through the use of fossil fuels.
• Disrupting nocturnal wildlife.  One example is the baby sea turtles in Florida who move toward the artificial light on the beach instead of the natural light of the moon's glow that leads them out to sea.
• Affecting human health by disrupting circadian rhythms and melatonin production, depressing the immune system, and disrupting sleep patterns.
• Destroying the enjoyment of the view of the starry night sky. (www.starrynightlight.com)

Window film is not the cure for all those things, but it can play a part.

The goal of the credit for Light Pollution Reduction is:

Minimize light trespass from the building and site, reduce  sky-glow to increase night sky access, improve nighttime visibility through glare reduction, and reduce development impact on nocturnal environments.

One way window film can meet this requirement is to reduce the amount of light passing through a window from the inside to the outside by up to 85% while minimizing the reflection from the interior lights. Even at night an amazing view can be maintained.  (multimedia.3m.com/mws/media/6636910/sustainable-design-information-sheet.pdf)

To see if a project qualifies for this credit most of the internal light has to fall within the building.  Luminosity measurements are taken outdoors with all the lights off and are compared to the measurements with all the lights on. The credit is achieved if the outdoor illumination level does not increase more than 10 % with the lights on.  Window films with lower visible light transmission ratings will greatly reduce the light trespass from the buildings.

Our Solar Vision representative can help you find the right film that can meet your needs for reducing light trespassing.

3M Window Film Saves Art Studio

3M Window Film saves art studio located on an Iowa historical farm.  When straight line winds hit the farm house, the windows in the art studio located in the southeast corner of the home cracked.  The windows, however, held together because of the window film.  If the rain had gotten in the house, precious art work which could not be replaced and expensive art supplies would have been lost.  The window also stayed in place for a period of time until the window could be replaced.  Injury and damage due to flying shards of glass was eliminated. The owner is an artist and interior decorator.  She knew that her antiques, furnishings and artwork was being protected everyday from the harmful effects of UV Rays by the window film applied to all windows of the house.  The film also reduced glare and provided privacy.  The windows did not have to be covered with drapes.  The beautiful landscape of this home was not diminished by blinds or other window coverings.  She was also able to use less energy in cooling her home. The window film provides extra insulation to the windows. For example, if you have single-paned window, the film would make the window perform like a double-paned window.

The owner is so thankful she had the window film applied to her windows.  The loss due the weather event would have been great.  Insurance can't replace property with sentimental value or creative property.

Die-Cut Decorative Film

Solar Vision applies a lot of Die-Cut Decorative Film.  The film is applied in new construction sites as well as sites that are remodeled.  Most of the film we use is 3M Fasara Film.  The 3M Fasara is easy to work with and gives excellent results. Occasionally, we do apply other brands.  It all depends on the contractor, decorator, or owner.  Decorative film is used in place of etched or sandblasted glass because the expense is much less.  Also if styles change or a new company moves in the film can be professionally removed and replaced. Decorative Film Provides:

• Privacy in offices or conference rooms.
• Light from outside can still filter to other parts of the room.  People are more productive in natural light.
• If their would be a natural or other physical event, the glass would be held together and there would not be flying shards of glass.
• The decorative film creates a modern look and adds to the ambiance of the building
• Consistent look throughout the building
• Branding of company is established through out the area
• Money savings
• A creative environment is established which draws customers and increased employee productivity and satisfaction.

  

• 

Linen 3M Fasara Film

Linen  3M Fasara Film was applied to glass pieces and shipped to the Ritz Carlton in St. Thomas.  The film has a texture of white coarsely woven linen.  Linen SH2FGLN gives a soft, natural look.  The film was applied to the glass and then covered with another sandwiching it in between the 2 pieces of glass.  This type of glass can be bought with real linen but is extremely costly.  The film gives the glass the same look.

The Linen Fasara Film is one of more than 50 types of Fasara Film.  It resembles Japanese Rice Paper.  The film combines eastern design and today's technology to create a tranquil and very classy modern look.  The Fabric Japanese Rice Paper family of 3M Window film has patterns with the look and feel of fabric or Japanese Rice Paper.  They have the look of etched, cut, textured or sandblasted glass at a fraction of the cost. The film is used in most cases on glass already present.  Glass does not have to be removed and replaced with a custom glass.  They also give privacy and light still enters the room.  The films provide UV protection as well filtering out more than 99 percent of the UV Rays.

Decorator Uses:

• Glass partitions
• Window panes
• Can be die cut
• Can be used on whole glass partition or customized
• Use limited only by imagination
• Used as an interior film only

Fasara 3M Films should be installed by professionals.  When they are applied, they are Considered permanent solutions.  When designs needs change, they can be removed and replaced.

This decorative film offers:

• Easy cleaning
• Privacy or can hide places less attractive
• Reduces fading from UV
• Protects occupants from broken or flying glass
• Is cost effective
• Gives the working or living space an element of design and uniqueness

Visit with our Solar Vision specialists to let us help you bring your design vision to a reality.

School Comfort and Window Film

School classrooms that are  comfortable are more conducive to learning.  The first consideration for window film is school safety. (See previous article)  Window film can be used in a number of ways to improve school comfort, make learning easier, and save energy as well. Comfort and Energy Savings

During my 34 years of teaching, I have been in a number of buildings.  All of those buildings have had hot spots.  There are rooms where the sunlight coming into the room is unbearable during certain parts of the day. It is distracting to be in a classroom that is overly hot. To keep those rooms at a temperature that is somewhat comfortable, the air conditioning has to be turned up. Many of the rooms in the school are then too cold and students need their sweaters or just shiver.  A hot room does not help students concentrate on their studies nor does a cold one. More schools are going to a year round schedule, so they have to deal with even more summer heat.  Solar Control Window film applied to classroom windows reduce the heat entering the room.  Not having to lower the thermostat, saves energy.  In winter, the film acts as an extra insulator on the window.  Savings is realized in the winter also.  The US Department of Energy says a third of a building's cooling comes from solar gain through the windows.  Window film will make the windows more efficient.  (http://solutions.3m.com/)

Window film also eliminates glare on whiteboards.  The film protects occupants from harmful UV rays which can cause skin cancer.  Some rooms may require a combination of window film and blinds.  When the blinds do not have to be closed, natural light enters the classroom.  Students learn better in natural light. Eyes get less tired.

We know that students learn better in natural light.  Attendance and behavior is also improved. (http://www.healthyschools.org/Daylight.pdf) Window film still allows natural light.  A new 3M Window Film is 3M Daylight Redirecting Film.  If you have just the right space, the film brings in more light at the top of the window and redirects it to the room.  This lessens the need for artificial light.

Mirrors or Perforated Graphics

I worked in some areas where we took data on the behavior of students.  Graphics or mirrors can be put on  the window to observe students undetected.  The graphics are made with tiny dots. On one side you see a picture.  On the other side you can see through.  A mirrored film can be put on a window and from the other side observations can be made.  This could work well when the dean's office has a window to the cafeteria.  The possibilities are endless in the school.

Smart or Switchable Film

A smart film can be turned on and off.  When it is on the film is frosted.  When it is off the window is clear.  Think of the many uses for offices like the principal's office. He/She can see what is going on when it is off and can have privacy when he needs it for conferences with parents, teachers, students, etc.

Sports Viewing Rooms

Black out film can be used in athletic viewing rooms to eliminate screen glare.  Solar Vision has installed this at a number of colleges and universities.

Anti-Bacterial

A film that is not a window film, but is an architectural film is Di-Noc.  Some Di-Noc contains silver which cuts down on the growth of bacteria.  In areas, such as the nurses office and preschool classrooms, the film applied to smooth walls may help reduce the spread of germs.

Solar Vision can do a study of how window film can save energy and help you plan ways to use window and architectural films in your school.  If you would like a study done, give us a call at 303-862-6376 or e-mail us at info@coloradosolarvision.com.

School Safety Improvement

School safety is an ever growing concern for schools. As a teacher of 34 years, I have seen a number of ways window films can be effectively used to improve school safety. The window film is retrofitted into already existing buildings which is much less expensive than replacing windows. Applying the film creates no mess and the windows are easily cleaned. Safety

Accidents involving glass account for a large percent of injuries in schools. Large areas of glass may not be seen by students and they may run into them. It is important to make the glass more visible. This can be done by applying opaque film or simple patterned film to the glass such as Fasara (http://solutions.3m.com/ ) It is important to make it apparent that the glass is there. The film can cover all or a portion of the glass. Every window or other transparent surface in a wall, partition and door or gate should be of safety material or be protected against breakage of the transparent material. It should be appropriately marked or have something to make it apparent. Film around door handles also help make the glass visible. Graphics can be used to make the glass more visible. The film can add to the learning environment and make it very creative and appealing. Graphics can be used to increase school spirit or motivate achievement in students and staff. Any picture or logo can be printed on the film.

Safety glass is required in high risk areas. Window film will hold the glass in place if someone runs into the glass. Tempered or toughened glass breaks into squares. Tempered glass may be defective because of manufacturing flaws. Impurities can get into the glass. Sometimes during installation small chips may occur. As the glass expands stresses will develop which may break the glass. When the stress is greater than the strength of the glass it will break. Window film on tempered glass assures that no one will be cut by the glass. Clean up is also very easy.

Glass should be:

•  Safe from breakage
•  Visible to avoid accidental collision

Safety can also be increased during weather events with window film. With straight line winds or a tornado most injuries are caused by flying glass. The window film holds the glass shards together. People in the building will not get cut by flying glass.

Security

Unfortunately, we live in a world where we need to keep unwanted intruders out of our schools and away from our children. As a teacher in a rural public high school, quite often we had bomb threats. Real or just a stupid prank, the school officials had to take it seriously. We would have to be moved to another school or a nearby church until the building was secure. If the threat had been real and there had been an explosion, bomb blast window film would prevent glass shards from entering the rooms and injuring students. 90% of all injuries from bombs is caused by flying glass. Even a small piece of glass can injure someone.

If a gun was rumored to be in the school or if there was a tip of a threat, then the school goes into lock down. All the classroom doors are locked until the threat has passed. Schools now have all outer doors locked. One generally has to be let into the school by someone in the office. If a person comes to the door shooting or begins shooting after entering, there is bulletproof window film. The film is expected to delay an active shooter from entering a school from three seconds to two minutes.

Security window film with an attachment will prevent entrance into the building.  A person using something like a baseball bat or crowbar, will be disappointed. Chances are the person will move on. A determined person still may get into the building, but his entry will slowed to the point that the police will have an opportunity to arrive on the scene.  The security film helps to prevent break-ins for theft or vandalism.  Solar Vision has applied 3M™ Safety and Security Window Film to several  school entrances as a test sites for other schools. 3M™ Safety and Security Film is being used in an increasing number of schools. 3M recommends using the Ultra Series S600 or the Safety Series S140. Impact Protection Attachment Systems bond the filmed window to the frame optimizing security. (http://solutions.3m.com/wps/portal/3M/en_US/Window_Film/Solutions/Support/Safety_and_Security_Window_Films)

At a 2014 Campus Safety Conference held at the University of Southern California , Brad Spicer, SafePlans CEO, outlined strategies to improve the safety of main entrances. One thing he recommended was having shatter resistant security window film applied on the doors and windows to make it harder for intruders to enter the building.. (http://www.campussafetymagazine.com/article/physical_securitys_role_in_a_k_12_environment)

Why use security Film in Schools:

•  Security film is less expensive than replacing all windows and doors with laminated glass.
•  The security film is easy to apply over existing glazing
•  The film doesn't stop a determined individual from entering a building, but gives extra time for help to arrive.

Anti-Graffiti

Why do kids do graffiti??? It is such a waste and such a problem in schools. Anti-Graffiti film can be applied to windows. The film acts as a sacrificial layer. The acid, paint or permanant marker is on the film. The film then can be removed and reapplied. Doing this quickly keeps from giving the vandals the attention they seek. The film can be applied to bathroom mirrors and outdoor signs as well.

Clean Filmed Windows

Clean filmed windows is an easy process.  You basically clean it as you would any window after 30 days. What to expect:

• Window film takes a period of up to 30 days to dry and cure.
• There may be a haze which will cause a visual distortion.
• There may be small water beads or bubbles.
• This is normal.  The haze or bubbles will disappear in a few days as the window film dries and cures.  The water used in installation needs to evaporate through the film during the curing process.
• Cold weather may lengthen the time while warm weather will shorten the time.
• Security films are thicker and take longer to dry.

Note:  The film may cure less than 30 days.  To be on the safe side to clean filmed windows, wait the 30 days.

What to use to clean your filmed windows:

• A soft cloth or clean synthetic sponge is recommended to clean filmed windows.
• To dry them use a soft cloth, paper towel or soft squeegee.
• Most glass cleaners work well.
• A good cleaning solution is 1/2 ounce of dish soap or baby shampoo in about a quart of water.  This is about one or two drops in a spray bottle.  You do not need much soap.

What to avoid:

• The film has a scratch resistant coating not a scratch proof coating, so never use any abrasive material on the window.
• Coarse paper towels may leave fine scratches on the film
• Do not use abrasive cleaners or abrasive sponges.
• Do not use cleaning materials that are contaminated with dirt.  This might happen if you clean outside the windows and then use the same sponge to clean the inside filmed window.
• Do not use industrial strength cleaners.
• Do not use cleaning tools that may scratch the film, such as hard squeegees.
• Products containing ammonia can be used but not in large quantities or often.

If you ever have any question about caring for your window film, please ask your installers or give Solar Vision a call.  We will happily give you the information you need.

3M Fasara Decorative/Privacy Film Application

3M Fasara Decorative/Privacy Film adds privacy to this work space.  It is a good way to reduce distractions in the workplace. The 3M Fasara Film also lets in natural light reducing the need for extra lighthing.  See the difference the film makes to these windows.

Fasara Film comes in 59 different designs.  They take the place of textured, sandblasted, etched, cut or other decorative glass for a fraction of the cost of decorative glass.  The film provides privacy and adds beauty to a room.  It can be customized by adding extra light or design.

Benefits of Using the 3M Fasara Decorative/Privacy Film Include:

• It is relatively inexpensive compared to decorative glass.
• There is a large variety of styles to choose from.
• After 30 days, it can be cleaned just like you would any other window.
• If styles change, it can be removed and left clear or replaced with another style of film.
• If there is an event which causes the window to break, the pieces will hold together. Injuries from flying glass will be prevented.
• The application is durable, fast, and beautiful.
• 3M and Solar Vision stands behind their product with a 5 year warranty for thermal shock damage.

How Can the 3M Fasara Window Film Be Used:

3M Fasara Decorative/Privacy Film can be used in offices, conference rooms, and lobbies. Retail stores, restaurants,and hospitality venues can use the decorative film.  These glass finishes can be used on partitions, showers, verandas and homes.  The film can be customized to give just the right amount of privacy, light, and decorative value.  The film can be computer cut for precision. The Fasara glass finishes are primarily an interior film, but 2 of the films can be used on the exterior. A beautiful  space  gives a favorable impression to workers and clients.  The addition of the light that is allowed into the room instead of a solid partition adds to worker productivity.

Anti-Graffiti Film Protects Windows

Anti-Graffiti Film protects windows from permanent damage.  Urban centers all over the country are having difficulties with graffiti.  City officials, residents, and property owners are continually seeking solutions to the abatement of graffiti in their neighborhoods.  Anti-Graffiti window film have properties to decrease the harmful effects of graffiti.  Anti-Graffiti window film can be a less costly solution over window replacement. Cities, not only in the US but all over the world are having trouble with graffiti vandalism. When graffiti is visible, people are less likely to shop, eat, go to other venues in the area. People are concerned that if graffiti is allowed that other crimes may also be in the area. Gang activity is also a concern.  Residents and visitors do not feel safe.  Graffiti can be in rural or small town areas as well.

City leaders seek ways to combat this growing issue.  One way is to take down graffiti ASAP. Window film can help remove the graffiti quickly.  The tagger or gang member wants to be recognized and if it is not up long, they won't get the attention they seek.  Another way is to give graffiti artist a place to do and show their work.  This can work for the person who is trying to get artist recognition.  Denver recently has added more police presence downtown for reasons other than graffiti, but graffiti is a part of it. Some youth like to show their independence from authority or take their anger out on people through graffiti.  Schools could benefit from window film by putting window film on restroom mirrors and other glass surfaces.  Graffiti is a senseless crime that is very costly. The city of Denver spends over a million dollars a year on graffiti removal.  Larger cities spend even more.  Window film can't solve the graffiti issue, but can be used as one of many tools.

Advantages of  3M Anti Graffiti Window Film Include:

• Scratch resistant
• Protects glass from permanent damage
• Gouge resistant
• Easily removed and replace by professional
• Used indoors or outdoors
• Resists acid or etching tools
• Can be cleaned as any other window surface
• Anti-graffiti film is clear and distortion free
• Has other benefits of window film such as 99% blocking of UV rays
• Comes is two thicknesses for low risk and high risk areas
• Backed by 3M warranties

Window replacement can cost up to twenty times the cost of window film. Window film is one of the many tools businesses and communities are using to combat the costly damage of graffiti.